HomeArticle

Wafer foundries have announced another price hike, leaving IC design companies in a difficult position.

半导体行业观察2026-11-20 11:39
Amid the global wave of price hikes in the wafer foundry industry, the chip design sector is seeing divergent fates.

A new round of price hikes is sweeping across the global wafer foundry market.

According to a report from *Commercial Times* of Taiwan, China on November 17, some IC design companies have successively received price adjustment notices from wafer foundries, with the increase ranging from 10% to more than 20%. If the increased manufacturing costs cannot be passed on to downstream customers, the gross profit margin of relevant enterprises may drop by 4 to 5 percentage points.

At the same time, the latest research from TrendForce predicts that driven by factors such as continuously growing demand for AI and servers, tightening production capacity and rising manufacturing costs, global wafer foundry prices will rise by 5% to 20% in 2027. Among them, the price increase trend for 8-inch wafers is more obvious, while the 12-inch wafer market shows differentiation due to different process nodes.

As soon as the news was released, the entire chip design circle instantly became highly alert. After the domino effect of cost growth is triggered, from AI computing power giants and international leading analog manufacturers to mid-to-low end design companies, what kind of fate differentiation with two completely opposite extremes are they going through?

Resonance of Three Driving Forces,

Pushing Up Foundry Prices of Mature Processes

In the past few years, the global semiconductor industry has gone through cyclical changes from supply shortage to inventory adjustment, and then to gradual demand recovery. Since 2026, with the continuous expansion of investment in AI infrastructure, the supply-demand relationship in the wafer foundry market has changed again.

Different from the previous boom cycle dominated by consumer electronics markets such as smartphones and PCs, the key driving force of this round of demand growth comes from AI, and its impact is continuously spreading from advanced processes to mature and specialty processes.

According to *2027 Wafer Foundry Outlook* released by TrendForce on November 11, the global 12-inch wafer foundry capacity in 2027 is expected to grow by 12% year on year, and the capacity expansion speed of advanced processes is slightly higher than the industry average. TSMC continues to focus on 3nm, 2nm and more advanced processes, while Samsung and Intel are also advancing corresponding capacity layout.

However, while the capacity of advanced processes is expanding, the supply-demand relationship of mature processes is becoming tighter instead.

Behind this change, the first factor is the spillover effect of AI demand.

In the past, when talking about AI chips, the industry mostly focused on high-performance products such as GPUs, ASICs and HBM. But in fact, a complete AI computing system not only requires high-performance processors, but also a large number of power management, power devices, analog and interface chips to provide basic support for computing, storage and data transmission.

Especially with the continuous increase of power consumption and power density of AI servers, the relevant demand for power management and power conversion has grown accordingly. These chips do not fully rely on advanced processes, and a considerable part of them are still manufactured with 8-inch or 12-inch mature and specialty processes.

Previous research from TrendForce pointed out that the growing demand for AI servers, general-purpose servers and edge AI is prompting fabs to allocate more capacity to products such as power management ICs (PMICs), power devices, silicon interposers and optical communication related chips.

The second factor is the continuous capacity structure adjustment of global fabs.

In recent years, manufacturers such as TSMC and Samsung have gradually reduced or adjusted part of their 8-inch and 12-inch mature process capacity, and invested more capital and manufacturing resources in advanced processes and high value-added businesses.

TrendForce data shows that in 2026, the average capacity utilization rate of 8-inch wafers among the world's top 10 wafer foundries is expected to reach 88%, and is expected to further rise to 90% in the second half of the year. Under the dual effects of growing demand for AI-related power devices and the exit of part of mature capacity, the supply shortage in the 8-inch market has become increasingly obvious.

Similar changes have also taken place in 12-inch mature processes. With the increasing demand for some high-voltage processes, silicon interposers, photonic integrated circuits and other products, some fabs have begun to adjust their product portfolios, and give priority to allocating capacity to applications with higher added value.

At the same time, the continuous changes in manufacturing costs such as equipment, materials, energy and manpower have further increased the operating pressure of fabs. For wafer manufacturing enterprises that need to maintain long-term capital investment, raising product quotations has also become a way to improve cost structure and operating returns.

Therefore, this round of wafer foundry price hike is not the result of a single factor, but the joint effect of growing demand, capacity adjustment and manufacturing cost changes.

Analog IC Giants Issue Collective Warning:

Cost Pass-through Has Started

The cost pressure brought by the rise of wafer foundry prices has also aroused widespread vigilance among global chip giants.

On the earnings calls held one after another in the past month, Texas Instruments (TI), NXP, STMicroelectronics (ST), Renesas, Microchip and Infineon all talked about rising input costs, tight supply chains or changes in chip product pricing without prior consultation.

On the earnings call for the fourth quarter of fiscal 2026 held on November 10, Sven Schneider, CFO of Infineon, pointed out that as market demand grows and the capacity of wafer foundries tends to be fully loaded, foundries are raising quotations more and more frequently.

Microchip also released a similar signal. Steve Sanghi, CEO of the company, revealed on the earnings call on November 5 that major wafer foundries and packaging and testing suppliers are expected to launch a new round of price hikes starting from January 2027. It is worth noting that although Microchip has its own wafer manufacturing and packaging and testing facilities, according to its latest disclosed data, about 65% of its revenue in the third quarter of 2026 still comes from products manufactured by external wafer foundries. This means that even IDM enterprises with part of their own capacity cannot completely get rid of the impact of rising external manufacturing costs.

Facing the upstream cost pressure, different companies have adopted different response methods.

NXP said it will pass the increased input costs in 2027 to customers to protect gross profit margin; STMicroelectronics has raised the selling prices of some products; Microchip, which just completed a round of price adjustment earlier, plans to bear the new costs on its own for the time being; Texas Instruments also confirmed that the prices of some analog chips have begun to pick up moderately in the second half of 2026, and it is negotiating with customers on the prices for 2027; Renesas also said on its latest earnings call that it has adjusted part of the selling prices according to product and customer conditions, and emphasized that the new supply chain costs need to be appropriately shared among all links of the industrial chain.

Behind this differentiation is actually the difference in the bargaining power of different enterprises in the industrial chain.

First of all, product technical barriers and customer replacement costs directly affect whether enterprises can raise prices smoothly. For chip products with differentiated technology, long-term customer cooperation relationships and high certification thresholds, suppliers usually have more room for price negotiation; for products with many alternative suppliers and fierce price competition, cost pass-through may be more difficult.

Secondly, the difference in manufacturing modes also affects the ability of enterprises to cope with rising costs. In recent years, Texas Instruments has continued to expand its own 300mm wafer manufacturing capacity, and enterprises such as STMicroelectronics and Infineon are also promoting the upgrading of their manufacturing systems. Compared with Fabless enterprises that are highly dependent on external foundry services, IDM manufacturers with their own manufacturing capacity can alleviate cost pressure to a certain extent through internal capacity allocation and manufacturing efficiency improvement.

Judging from the latest statements of the six major international chip giants, this new round of cost growth test is not only about the manufacturing capacity of enterprises, but also about their product competitiveness, customer bargaining power and supply chain management level.

The ASIC Giants that "Get Busier but Earn Less"

In this unpredictable round of price hikes, the most surreal scene appears on the ASIC (Application Specific Integrated Circuit) design service enterprises that stand on the AI trend.

Taking GUC and Alchip, the industry trendsetters from Taiwan region, as examples, they are the pioneers that benefited the earliest and the most from this AI wave, holding huge orders for self-developed AI chips from global cloud giants, and their revenue maintains rapid growth. But looking through their financial reports, we can find a worrying "scissors gap": while revenue is surging, the gross profit margins of the two enterprises are both under pressure to varying degrees.

According to the October self-consolidated performance released by Taiwan ASIC design service enterprise GUC on November 16, the consolidated revenue reached NT$8.433 billion, a year-on-year increase of 126.9%; the net profit after tax was NT$500 million, a year-on-year increase of 156.4%. However, according to the third-quarter financial report previously released by GUC, the revenue in the quarter reached NT$18.755 billion, a year-on-year increase of 118%, but the gross profit margin was 20.6%, down 3.6 percentage points from 24.2% in the same period of last year.

The performance of Alchip, another ASIC design enterprise, was even more outstanding in the same period. Its consolidated revenue in October reached NT$10.26 billion, a year-on-year increase of 515.81%; the net profit after tax was NT$873 million, a year-on-year increase of 66.69%. The gross profit margin of Alchip in the third quarter dropped to 18.04%, hitting a low level in nearly three years.

Why has the rapid growth of AI chip orders not driven the gross profit margin of ASIC companies to increase simultaneously?

Here we need to understand the special business model of ASIC design service enterprises. Different from traditional standard chip companies, ASIC design enterprises usually have two main types of businesses: one is non-recurring engineering (NRE) fees and IP licensing, which mainly comes from chip design and R&D services; the other is the Turnkey business, which means that after completing chip design, the enterprise is further responsible for wafer manufacturing, packaging and testing, chip delivery and other links.

There are obvious differences in the revenue structure and gross profit margin between the two types of businesses. The NRE business mainly reflects the value of R&D and engineering services, while the Turnkey business needs to include supply chain costs such as wafer manufacturing, packaging and testing into operating costs. With the expansion of mass production scale, the overall revenue of the enterprise may increase significantly, but the comprehensive gross profit margin may not rise synchronously.

The financial report of GUC clearly reflects this change. In the third quarter of 2026, the company's Turnkey business revenue reached NT$16.671 billion, a year-on-year increase of 190%, accounting for about 89% of the total revenue. The company clearly stated that the increase in the proportion of Turnkey business was the main reason for the decline in gross profit margin in the quarter.

However, it is worth noting that in the same period, the gross profit of GUC increased by 85% year on year, and the operating profit increased by 142% year on year. This means that although the gross profit margin has declined, the actual profit scale of the company is still expanding rapidly. Therefore, we cannot simply interpret the decline in gross profit margin as a deterioration of enterprise operation, let alone directly attribute the gross profit margin change that has already occurred in 2026 to the new round of wafer price hike that has not been officially implemented in 2027.

But the problem is that when the proportion of Turnkey business continues to increase, wafer manufacturing costs will also have a more direct impact on the revenue and profit structure of ASIC enterprises. Especially for AI ASIC enterprises that are highly dependent on advanced processes, wafer procurement costs, yield, advanced packaging resources and the price adjustment mechanism in customer contracts may all affect the final profit performance. If wafer foundry prices continue to rise in the future, and downstream customers are unwilling to bear all the new costs, ASIC enterprises may face new profit pressure.

Mid-to-low End Chips Survive in the Cracks

Compared with international chip giants with strong customer bargaining power and high-end ASIC enterprises benefiting from AI demand, some general analog chips, MCUs and consumer electronics chip design companies may face a more difficult situation.

On November 16, Richtek, a Taiwan-based power management chip manufacturer, talked about the new round of wafer foundry price hike pressure at its corporate presentation. According to relevant public reports, Richtek has received price adjustment notices from many wafer foundries, with an increase of about 10% to more than 20%. If the selling prices of downstream products cannot be adjusted, it is expected to have an impact of about 4 to 5 percentage points on the gross profit margin.

Richtek plans to renegotiate prices with customers in the first quarter of 2027, and considers exiting some low-end standardized product markets such as LDOs, and shifting resources to higher value-added businesses.

This statement reflects the direct impact of wafer foundry price hikes on IC design enterprises. On the one hand, the upstream wafer manufacturing costs have increased; on the other hand, the demand in some consumer electronics end markets is still weak, customers are very sensitive to product prices, and even ask to maintain the original quotation on the grounds that other suppliers have not raised prices.

For chip products with high standardization and a large number of suppliers, downstream customers often have strong bargaining power. Even if upstream manufacturing costs rise significantly, chip design enterprises may not be able to raise product selling prices synchronously.

This forms a realistic contradiction: if they do not raise prices, enterprise profits will be squeezed; if they raise prices, they may face customer loss and declining market share.

Especially in the past few years, some analog chips, MCUs and consumer electronics chip markets have experienced a long period of inventory adjustment and price competition. Some enterprises have continued to lower product quotations in order to compete for orders, and the profit margin of some standardized products has been relatively limited.

In this context, the further rise of wafer costs will undoubtedly further test the profitability of enterprises. Under such industry background, some enterprises have begun to take the initiative to consider exiting low-profit markets.

If the wafer foundry price hike continues, more and more IC design enterprises will have to re-examine their product portfolios: which businesses are worth continuing to invest in, which orders can bring reasonable profits, and which markets should be actively chosen to enter or exit? Shifting from pursuing shipment scale to paying more attention to the profit contribution per unit product may become an important adjustment direction for some chip design enterprises in the next stage.

Conclusion

From wafer foundries adjusting their quotations, to international chip giants re-examining product pricing, and then to some IC design enterprises voluntarily abandoning low-profit businesses, the impact of the new round of price hikes is gradually spreading along the semiconductor industrial chain.

Different from previous price hikes that were purely driven by demand recovery, behind this round of changes, multiple factors such as AI demand expansion, mature process capacity adjustment and rising manufacturing costs are also superimposed.

For chip design enterprises, the real test is not just how to absorb the rising wafer costs, but whether they can build sufficient product competitiveness and bargaining power in an increasingly differentiated market.

This article is from the WeChat official account "Semiconductor Industry Watch" (ID: icbank), written by Du Qin DQ, and published with authorization from 36Kr.